Smartphones

How to make an access point on the phone. Distribution with Android system

How to distribute the Internet from the phone on Android or iOS

Any modern phone can distribute the Internet to computers, tablets and other smartphones. It is enough to activate 3G or LTE on this phone and connect the desired device via Bluetooth, USB or Wi-Fi to it. And the third option allows you to distribute the Internet into several devices immediately.

After successfully connecting gadgets to the smartphone, you can use the network on any of them, including source.

Some tariff plans may not support modem mode. If, after setting, the data will not be transmitted, refer to the operator.

Access point Wi-Fi from phone on Android

To use the Android smartphone as a router, go to the settings, then, in the “Wireless Networks” section, select “” and on the next screen. “Modem Mode”.

Mark the Wi-Fi Access Point item. Wireless settings created by your phone can be changed in the corresponding item. “Setting the Wi-Fi Access Point”.

SSID access point name is available for change, network encryption type and Wi-Fi password. After all the settings are made, you can connect to this wireless network from any device that supports it.

How to set up the network we added

Real Mobile Expert! He writes useful articles and instructions for mobile themes by simple and understandable language, gives the right and left the most most. Watching the section “Articles and Lifehaki”.

Process description

For this, there will be no special applications or equipment, just one smartphone.

We will analyze on the apparatus with the Android OS, but by analogy can be done on other gadgets, since everything is very similar everywhere.

To enable Wi-Fi dots, follow the instructions:

  • Go to the “settings” of the gadget.
  • Open the “Network” menu.
  • Then you need to select the item “Modem and Access Point”.
  • Click “Wi-Fi Access Point“.
  • Customize access point. To do this, you must put a tick in front of the string “Configure Access Point“.
  • Now you need to enter the name of your created network in the SSID network window. For correct display of symbols, name Write in Latin letters.
  • Next, go to the “Security” item where WPA2 PSK should be noted. This item will provide network protection from foreign users.
  • Fill the password string and click “Save”.
  • The system will redirect you to the item of this list.
  • We put a tick in the point and click “Yes”.
  • The appropriate access point icon appears in the Device panel.
  • Take a laptop-beech or other device to be connected to the access point. Run the Wi-Fi scan and find the network you just created.
  • Connect to the network found by entering the password.
  • If you do everything right, the system will notify you about connecting.
See also  The phone does not find my location. Method 3: Calibration Module

Real Mobile Expert! He writes useful articles and instructions for mobile themes by simple and understandable language, gives the right and left the most most. Watching the section “Articles and Lifehaki”.

How to configure android access point

You probably saw the button of access point in the fast phone settings panel. Despite the fact that this is the fastest and easy way to enable or disable a mobile access point, you need a little time to first configure it.

Here’s how to configure the access point for Android:

  • Open the Settings application.
  • Select Network and Internet or Connection and Sharing (depending on Android version).
  • Click Wi-Fi Access Point.
  • On this page you can enable or disable Wi-Fi Access Point. In addition, here you can change the point name, security type, password and much more.
  • Follow the instructions to configure the Wi-Fi point function to your liking.

The difficult part is over. It remains only to turn on the access point. To do this, in the settings there is a convenient switch, but it is more convenient to include it from the curtain notifications.

Keep in mind that manufacturers of smartphones often add their items to the interest Android. Because of what the path to setting the access point may differ. This manual is based on Xiaomi Mi A3 settings with clean Android One and Mi 9 SE with MIUI 12. Despite the fact that the path to the settings will be different, it will be relatively similar.

Distribution Wi-Fi with smartphone on Android

Before turning the smartphone based on Android to the router, check if mobile data is enabled. To do this, open the quick access menu at the top of the screen. Menu tab can be called “Mobile data” or “Data Transfer”, with a globe or two multidirectional arrows icon. It must be active, that is, highlighted.

See also  How many volts in the phone charger. Analog with built-in power supply

Do not forget to make sure that the transfer is active with the SIM card to which the mobile Internet fare is connected. Check or Change This Conditions You need to check the Settings tab. Data Transfer. Mobile Data, Next. Select the desired SIM card.

So, mobile Internet is active on a smartphone. Now you need to share with other devices. The easiest way to do it through the quick access menu. It needs to find the appropriate icon: “Access point” or “Mob. Access point “(may be called otherwise). Look for an image with a characteristic icon with radio waves. Click on the icon. Illumination means that your smartphone has begun to transmit data as a router.

If the previous method for some reason is impossible, let’s go more long by. It will be necessary through the settings to find the “Modem mode” or “Modem mode and an access point”. Lay down the “” tab, “Wireless Networks”. “” or “SIM Cards and Networks”. Here is the desired modem mode, turning your gadget to the router. After clicking the tab, a panel will appear with all settings and activation of the mobile access point. You can immediately activate the modem option, shifting the checkbox in the working position. Now the phone performs the functions of the router. After its activation, the network on another intees will be detected in the list of all available under the specified name, as in the smartphone.

make, access, point, phone

For better communication, stable speed and security, make additional connection settings in the appropriate tabs.

  • Leave the Password item blank is inappropriate, as it will open access to the network of your device for anyone. Secret code set by default on your smartphone can be found by clicking on the “View password” icon or on the eye symbol. Now you can specify it on the receiving device.
  • Next, check the Wi-Fi frequency setting. 2.4 GHz. For systems that support the frequency of 5 GHz. the corresponding value. From this depends the speed of information transfer.
  • Additionally, settings allow you to change the name of the network. SSID. Under this name, it will be determined in search Wi-Fi. It affects the speed of the connection and on other technical moments.
  • In order not to add a manual new devices for which the wireless network opens, set the appropriate permissions on the “Manage authorized devices” tab.
  • The default type of encryption WPA2 PSK. It is recommended to leave as it is.
See also  Why samsung's phone sits fast. Why quickly discharges Samsung Galaxy S4, S4 Mini, S3

All settings for distribution of the Internet from the smartphone on Android are made. Next, you need to select a wireless network from the list on another device and connect to it.

Security

  • No. in this case, any person who is close to your network will be able to connect
  • WPA / WPA2. At the same time, the security type you assign a password for your access point and connect to it only those who you say password. Password is assigned to the line below, it must be at least 8 characters.

Malicious and antivirus programs

Vi-fi to interfere with the correct work of Wi-Fay may also have viruses that smartphone “caught” online. If you suspect infection, it will be appropriate to install an antivirus program on the phone and check. There are many such programs, but usually used brands like Kaspersky and ESET NOD.

Other side of the medal: Antivirus and other protective programs, such as firewall, can be source of problems. Antivirus creates a kind of “shield” to filter traffic, which sometimes affects communication. If after removing the anti-virus software, the connection works correctly, in this case you have to try another software or refuse it.

How to reset Wi-Fi settings

At the very beginning you need to say that you change the configuration only for the selected connection. That is, these settings will not spread to other points. In other words, to reset the Wi-Fi configuration in your smartphone for a specific connection, you will need to simply activate the Wi-Fi module and the network you want to delete. In a new window, tap on “Forget Network” or click on “Change Configuration”.

In the first version, the configuration is deleted for this connection, and you will have to enter a password. In the second option, you can enable the DHCP feature in IP settings. It will allow your smartphone to receive the desired settings in automatic mode.

Similar Posts

| Denial of responsibility | Contacts |RSS