Smartphones

The computer does not see the microphone from headphones. In order for the quality of the analogue better

How to use headphones as a microphone on a computer: step by step

If you have very good headphones, but it is impossible to find a microphone, which would come to you and did not reduce the sound quality, you can make it from headphones. It will allow you to record speech, control chats and respond to calls.

If you have headphones without a built-in microphone, then they can be used to record sound. Quality, of course, will not reach the studio strongly, but it will be enough for negotiations.

To use headphones to record sound on a computer, you need just stick them in a microphone connector. Why it works? The fact is that both headphones and microphones have a vibration diaphragm, which converts an electrical signal into sound and vice versa. If you are using a microphone, the diaphragm sends from it to a computer (through the built-in amplifier and mixer) converted beep. And when you use headphones, the process goes in the opposite direction. from the computer to a diaphragm that converts an electrical signal into the sound. And how to use the connected device, solves the connector.

For this method, any headphones are suitable: inserts, arrogants, even full-size overhead.

As a rule, it is enough just to connect headphones into a microphone connector. But sometimes you need an additional setup (in its process we at the same time check the performance of the headphones):

  • Open the Control Panel. To do this, in Windows 10, right-click on the Start button and select the appropriate line from the drop-down menu. On Windows 7, open the “Start”. “Control Panel”.
  • Find the “Sound”.
  • Select “Sound Device Management”.
  • Open the “Record” tab.

computer, does, microphone, headphones

If you previously connected other microphones, they can be displayed here

Other users do not hear me

Try the following steps.

If your headset is equipped with a sound off button, make sure that it is not pressed.

Make sure the microphone or headset is properly connected to the computer.

Make sure that a microphone or headset is used as a system device for recording sound. Here’s how it can be done in Windows 10.

Select Start. then select Sound System Options.

Make sure that the microphone is selected in the Login field.

To test the microphone, tell me something, watching the parameter check the microphone to make sure that Windows hears you.

Open conductor

Often the problem is associated with the fault of the wire

In 90% of cases, problems with the sound in headphones or microphone signal arising during the operation of the headset are associated with the integrity of the electrical circuit. The most sensitive to the cliff zones are the joints of the conductors:

  • TRS connector of 3.5 mm, 6.35 mm or other;
  • The branching node of the audioline (is usually made as a separate block with a volume control and control buttons);
  • Positive and negative contacts of the microphone;
  • Bluetooth module connectors in wireless models.

Detect such a problem will help smooth movement of the wires in different directions near the joint zone. Usually, the signal occurs periodically, in some positions of the conductor, it can even be relatively stable.

If you have electrical repair skills, try moving the headset chains by a multimeter. Figure below shows the pinout of the most popular combination MINI-JACK connector 3.5 mm.

MINI-JACK COMBINED MINI-JACK CONCURNS

Nevertheless, some manufacturers use connectors with another contact location. First of all, it is typical of the old phones from Nokia, Motorola and HTC. When discovery, it can be easily eliminated by soldering. If you used to be able to work with a soldering iron, better contact a specialized workshop. Of course, it is relevant only for expensive and high-quality models of headphones, repairing a “disposable” Chinese headset is inappropriate.

System settings

It is possible that the user is simply shot down the settings of the sound recording equipment. This is a fairly common phenomenon, especially if the headphones themselves work properly.

See also  Scan Barcode Phone Code iPhone.

To check and adjust the OS parameters, it will be necessary:

  • Open system tray. This is the area to the left of Windows clocks on the taskbar.
  • Click PCM on the image of gramophone.
  • Select in the “Record Devices” in the appeared list.
  • Find used equipment. If it is displayed in the corresponding window, then the microphone is simply not configured.
  • Double click on the line with the microphone used.
  • Go to the “Levels” section and set the sliders as above.
  • Save changes.
  • Click PCM on the selected device in the “Record Devices” window and click on “Enable” (may be the inscription “Use”). If desired, the user can set the “Use by default” parameter.

Now it is clear why the computer stopped seeing the microphone from headphones. But that is not all.

System settings

It is possible that the user is simply shot down the settings of the sound recording equipment. This is a fairly common phenomenon, especially if the headphones themselves work properly.

To check and adjust the OS parameters, it will be necessary:

  • Open system tray. This is the area to the left of Windows clocks on the taskbar.
  • Click PCM on the image of gramophone.
  • Select in the “Record Devices” in the appeared list.
  • Find used equipment. If it is displayed in the corresponding window, then the microphone is simply not configured.
  • Double click on the line with the microphone used.
  • Go to the “Levels” section and set the sliders as above.
  • Save changes.
  • Click PCM on the selected device in the “Record Devices” window and click on “Enable” (may be the inscription “Use”). If desired, the user can set the “Use by default” parameter.

Now it is clear why the computer stopped seeing the microphone from headphones. But that is not all.

Additional Information

In conclusion. a few more points that may be useful in the context of solving problems with the operation of the microphone in Windows 11:

  • Try using built-in microphone troubleshooting tools in Windows 11. In the options. the sound in the “Advanced” section in the “Establish Common Sound” item, press “Input Devices”. This can help in some situations: for example, if the problem is caused by disabled services.
  • If all settings suggest that the microphone should work and it is present in the device manager, try to enter the “Record” tab in WinR. MMSYS.CPL, select the desired microphone and click “Properties”. On the tabs that opened windows, try to disable (if available) any microphone effects, enable or disable (depending on the current state) monopular application access to the microphone on the Advanced tab.
  • With the inoperability of the microphone only on the front panel PC, it makes sense to check its connection (or connect to the rear panel). Read more: How to connect the front panel of the computer system block to the motherboard.
  • Rarely, but it happens that the microphone does not work due to hardware problems or defective cable. I recommend checking it on a different computer to clarify: a problem in the system or the microphone itself.
  • A situation is possible when a new headset with one combined connector for microphone and headphones connects to the old computer or laptop. Here it should be borne in mind that on old sound cards may not be supported by the simultaneous operation of the microphone and headphones at one output.

Survey and troubleshoot at the hardware level

Any of the three decisions described above should have helped to establish a microphone. If none of the recommendations worked, it is worth thinking about whether he is working. That is, the reason can be directly in the “hardware”, and not in the system or drivers. What can be advised in this case:

  • Try to connect your headphones with a microphone to another port. Sometimes it happens that, for example, from several USB ports one turns out to be inoperative.
  • On some headphones (this applies mainly game models. Hyperx, A4tech, Razer Kraken, Logitech, etc.) microphone can be turned off with button. Sometimes the user may accidentally press it. The situation occurs when the microphone worked fine, and then stopped.
  • If switching to another port does not help, try to take another headset. Perhaps the microphone on another headset will work without problems.
See also  HDMI does not work on LG TV. Non-working port connections

Options solving the problem

Each defect is selected an individual way to eliminate it. Therefore, below can be found the most appropriate option:

  • If you are crashing it is to click at the bottom of the screen on the tray, namely on the speaker icon. In the menu, what to highlight, you need to select a string called “Recording Devices”. After that, in the tab, click on “Record”. If your headset is not displayed there, you have to click on any space in the window. Next, the area will open, it is necessary to put ticks next to all the proposed parameters. After that, it is possible about and completing the action using “Save”. Then it is recommended to check the healthy again: Several phrases. In a positive outcome there will be near the icon to change the noise level.
  • If the mechanism is incorrectly configured, you need to view the indicators, after clicking on the item “Properties”. Through this tab, go to “Levels” and specify the parameters you want.
  • When the device is occupied by another program, you need to start the task manager using a simultaneous Ctrlshiftesc combination. If you find in the section then an application that may interfere with the operation of the microphone, it should be turned off.
  • If other accessories are attached to the design, it is desirable to remove them from the connector. After that check the performance using the “voice record”. When listening to audio or voice will be heard, or no. The latter situation states not to choose the program of the invention. Most often we are talking about Skype, therefore, it is necessary to go to it and. There to choose “Settings” and make sure that your headset is chosen there.

Why the laptop does not see the microphone: causes and ways to solve the problem

When connected to a computer of an external microphone, trouble may occur, for example, PC will simply not detect the device. Another common problem. the microphone does not see certain programs. It may be associated with malfunction of technology, problems in software settings or incorrect connection. To eliminate problems, it is not necessary to contact the service center, it is fairly fair to follow the instructions.

Each laptop has a built-in microphone, but its quality leaves much to be desired. Users have to buy external devices for high-quality voice. They differ in the connection type:

Wired microphones are the most vulnerable, since with the time of the wires come into disrepair and cease to perform their function. Difficulties with connecting wireless devices can only occur in the setting step. You can check the equipment through the standard Windows Voice Recording Program.

Microphone connection problems can be divided into two groups: those that can be solved independently, and those that can be corrected only in the service center.

You can correct the following:

Serious malfunctions that require the involvement of specialists:

General recommendations

The first thing is to check if the laptop does not see the microphone. whether it is connected correctly. USB models are inserted into the USB port, there are no problems with them. The device with a type “Jack” must be inserted into the connector on which the microphone is drawn, most often it is pink. Also on wired models will not be superfluous to check the integrity of the wires. If they are interrupted in some place, the microphone will only work in a certain position. In half cases, these simple actions help to find the cause of a malfunction.

When connecting a Bluetooth headset, you need to enable data transmission on PC. After that, go to the “Control Panel”, subsection “Equipment and Sound”. Click on “adding a new device”, find the desired model and connect.

See also  How to reset the password on the phone lg. How to make the LG phone reset when it is blocked

The computer does not see the built-in microphone

If earlier the built-in device worked well, but suddenly stopped, perhaps the reason in obsolete drivers. You can update them without leaving the house, manufacturers of technology lay them in free access on official sites.

  • You need to go to the computer website in the “Drivers” section.
  • Find the model of your PC and the operating system.
  • Download the necessary drivers and install them.
  • Reload Laptop.

There is another way to update software. In the “Control Panel” you need to go to the Windows Update Center section and select Outdated Drivers.

Nuances of different versions of Windows

Listed instructions are suitable for Windows operating system. In different versions, settings may be called differently. In Windows 7, updating the drivers and setting the sound occur in the methods described above.

For Windows 10 there is another way to troubleshoot problems:

  • In the “Start” menu, you need to click on the gear and go to “Parameters”.
  • Select “Update and Security”.
  • Click on the “Troubleshooting” button in the left menu.
  • The module itself will detect the available problems on the computer. You need to click on “Play Sound” and run troubleshooting.
  • The program will try to solve the task yourself, the user only needs to confirm the actions.

Laptop does not see the microphone from headphones

If the headphones work properly and the wires are not damaged, the reason should be signed in the computer software settings. You need to right-click on the sound icon on the taskbar and select “Recording Devices”. All connected microphones are displayed in the window.

You need to click on the device used twice and go to the “Levels” section. All sliders need to be installed in the working position and save changes.

Next, in “Recording Devices” you need to click on the right mouse button along the selected microphone and click the “Use” or “Use Default” button.

Laptop does not perceive an external microphone

When problems with connecting an external microphone, you should check all the listed reasons:

  • Wires and connector on a laptop;
  • Correctly configuring a Bluetooth connection;
  • The relevance of the drivers;
  • The correct setting of the “recording device”.

If it did not help, perhaps the reason is the malfunction of the device itself. You can check it, connecting it to another computer. In the event of a breakdown, you will have to return it to the store under warranty or attribute to the service center.

If the microphone is accurately correct, you should check the computer for viruses. Often they damage important parts of the system, and external devices work incorrectly. Free programs are recommended to download from official site manufacturers sites, and official versions purchase in stores.

What if Skype does not see the microphone

In Skype there are several ways to check the performance of the microphone:

  • Call a subscriber to test the sound;
  • Call Sound Test Service and check your result yourself;
  • In the main settings, find “Sound settings”, start talking, the volume control will start fluctuate if everything is fine.

If the computer works on the computer, and there is no problem in Skype, the problem is in the program settings. They can choose the desired microphone and speakers, change the volume.

What to do if Alice does not hear a microphone

If Alice does not hear what the user says, you need to change the sound settings on the computer. In Windows, you need to go to “Record Devices”, select the desired microphone and install it by default. After that, you can test the program: click on the voice control icon and pronounce the phrase. If the round icon breaks next to, everything works.

Similar Posts

| Denial of responsibility | Contacts |RSS